General Technics Flow
General introduction on MEA production line
1. Feed PET frame/GDL carbon paper/CCM proton membrane into the feed port through the way of loading by coil stock or sheet stock to unwind and correct and to purify the air .And destaticize the material at the same time.Then convey the material to flexible CNC cutting machine before they are processed in the pre-technique.And cut it precisely in accordance with the setting of the processing parameters.In front of the CNC cutter is the visual inspection device which inspects the material cutting size and the status of the cutting condition.Convey the finished products and faulty products separately after the cutting procedure.The materials cutted off from active region of PET frame are a little big which can be collected and stacked for secondary reusing.All the raw materials are stacked by automated robot.The cutted CCM proton membrane will be conveyed to catalyst spaying area to be spayed, where slip sheets and proton membrane will be separated.Then the sprayed products will be conveyed to seven in one processing sites ,waiting to be stacked.
2. After the material of PET frame/GDL carbon paper/CCM proton membrane were tranfered to the position of stack, the robot with CCD visual detecting device will proceed to the procedure of stacking and adhesives coating.(The procedure of stacking: lower tooling entry→lower tooling vacuumization→PET framing→GDL carbon paper-adhesive coating→CCM proton membrane→GDL carbon paper-adhesive coating→PET framing/GDL carbon paper).The techniques of stacking ,adhesive coating and transfer are completed by linear module and mechanical arm jointly.
3. After the stacking of the three kind of materials of PET frame/GDL carbon paper/CCM proton membrane,the automated robot will absorb the material onto the lower technical equipment after which the processed material will be tranfered to the next procedure of seven in one(vacuumization and hot pressing→cool pressing(backtracking of upper technical equipment)→cutting → air tightness detection. The above processes work succesively . According to the processing time of material thermal packaging, the time occupied by the beat is the time of thermal packaging and air tightness detection. The time of thermal packaging and air tightness detection varies from 30-180 seconds. The beat of the finished product is determined according to the process. On average, a set of finished MEA film electrode products is up to 3 minutes at most, and the yield rate of eligible products is 99%.
4. After the air tightness test of MEA, the manipulator quickly moves the finished MEA to the detection station for finished product detection. After the detection, the MEA is quickly coded and scanned. The scanned information is transmitted to the management system through the MES system. At the same time, another manipulator places the product in the finished product area or waste material condition according to the scanned information. At the same time, the lower tooling returns to the initial position and waits for the next process cycle.
Function overview
The flexible numerical control cutting process is carried out on the main rolls or flakes of the PET frame prepared by the PET frame. The flexible cutting is carried out according to the instructions to cut the active area and the outer frame. Through the process working time, it is ensured that a piece of equipment meets the production needs of the post-process. By adjusting the cutting track and process parameters, it can be compatible with all sizes of cutting, various shapes of PET frames can be cut, with human-machine interaction PC interface, various specifications of products can be quickly switched in the program, and has the function of data collection.
Cutting Equipment Layout Reference:
Flexible CNC Cutting Production Line Reference:
Flexible CNC Cutting Conveyor Reference:
Process content:
The PET frame/GDL carbon paper/CCM proton film is rolled in the form of a specific width roll material, and then flexible cutting is carried out. Flexible cutting inside and outside the cutting task, and continuous cutting is carried out after a series of processes such as deviation correction, dust removal, and tension control. The raw materials cut from the active area are collected as finished products. Because the original price ratio cut is large and can be used as a secondary use, it is stacked and packaged. The waste from edge cutting falls into the waste box, and the finished product is transported to the six-combination line for waiting.
The PET frame/GDL carbon paper/CCM proton roll or sheet material is first sent to the cutting platform. The platform cutting manipulator quickly cuts inside and outside according to the visual positioning, thereby effectively ensuring the accuracy of material cutting. After cutting, it is transported to the six combination equipment, and the manipulator effectively stacks according to the stacking beat.
Technical cutting parameters:
1 Framing speed: ≥ 30-40 pieces/min;
2 Product pass rate: 99%;
3 Belt speed: ≤ 0-100/S;
4 Incoming material roll width: Max 300-800
5 Incoming roll diameter: Max 500mm; 3.6 Weight of incoming roll: Max 200kg;
7 Dimensional accuracy of cutting: ≤ ± 0.05mm;
8 Cutting width: 100-400
9 Cutting length 100-600
10 Size replacement: manual setting parameters can be used;
11 Cutting does not produce fiber burrs and burrs;
Function overview
The membrane electrode seven-in-one or five-seven-in-one production line equipment is mainly used to produce a complete set of processes for MEA membrane electrode forming. This equipment is suitable for special equipment for vacuum heat sealing/cold setting/port cutting/air tightness detection process forming after various materials of fuel cell membrane electrodes enter the production line for seven-in-one combination, and can produce a set of qualified MEA membrane electrodes in 30-180 seconds. Adjusting the process parameters can be compatible with the preparation of membrane electrodes within a certain size range. With human-machine interaction PC interface, products of various specifications can be quickly switched in the program, and have the function of data collection.
The Flow Chart of Hot Pressing/Cooling/Cutting/Air tightness Detecting
Process Content
Provide proton film, carbon paper, PET frame/GDL carbon paper/CCM protons of a specific width, and transport them to the designated location by conveying line or tray. The robot will automatically compound adsorption and transport according to the programmed route. The conveying process route is as follows:
Process flow: Prepare the raw material stacking and gluing process, which can complete the seven-in-one or five-in-one process, and the raw materials are stacked by the robot compound adsorption. The action process is as follows: tooling moving in → tooling vacuuming → robot feeding and discharging → robot automatic stacking → manipulator gluing → stacking completion → tooling moving in → vacuum hot pressing → cold pressing and setting → shape cutting → air tightness detection → robot feeding (tooling returns to cycle) - product appearance inspection → inkjet coding → finished product stacking.
Mainframe Technical Parameters
| S/N |
Name |
Unit |
Parameter |
Remarks |
| 1 |
Production beat |
S |
30-180 |
According to the holding pressure, the timing will change. |
2 |
PET frame GDL carbon paper/CCM proton film size range |
Maximum length |
mm |
100-600 |
Set arbitrarily within the range |
| Maximum width |
mm |
50-200 |
Set arbitrarily within the range |
| Thinnest thickness |
mm |
≤0.02 |
Set arbitrarily within the range |
| Cutting size |
Maximum product width |
mm |
150*550 |
|
| Active area cutting accuracy |
mm |
<±0.05 |
|
| PET border/GDL carbon paper/CCM stacking alignment accuracy |
mm |
±0.05 |
|
| Effect of cutting |
|
|
No fibrous burrs and burrs |
| Tension control accuracy |
N |
±2 |
|
| Yield |
|
≥99% |
Remove bad incoming materials |
3 |
Seven-in-one MEA products |
Maximum compatible width: |
mm |
300*550 |
|
| GDL dispensing: |
|
Online dispensing |
|
| Dispensing position accuracy |
mm |
≤±0.1 |
|
| Rubber line width |
mm |
≤1 |
|
| Rubber line width accuracy |
mm |
≤±0.1 |
|
| Seven-in-one material sheet alignment: |
mm |
≤±0.1 |
|
| The cathode and anode GDL are misplaced:; |
mm |
≤±0.1 |
|
| Squeeze head parallelism |
mm |
≤0.03 |
|
| Maximum temperature |
ºC |
200 |
|
| Seven in one cutting |
mm |
±0.03 |
|
| Cutting accuracy, product length and width dimensional accuracy |
mm |
≤±0.5 |
|
| Equipped with visual inspection accuracy ± |
mm |
0.1 |
|
4 |
Finished product testing equipment |
Loading and unloading method |
|
|
Automatic loading and unloading |
| Visual inspection Dimensions, accuracy |
mm |
≤±0.1 |
|
| Quality inspection: |
Visual inspection of MEA surface quality, identification of microporous layer defects, creases, fractures and other defects; |
| Air tightness detection |
|
|
Flow Detection & Differential Pressure Detection |
| Traffic resolution |
ml/min |
0.01 |
|
| Detection Differential Pressure Resolution |
KPa |
1 |
|
| Detect repeatability |
|
≤±5%; |
|
| Upper and lower platen parallelism: |
mm |
≤0.03 |
|
| Online Impedance Detection: Detection Accuracy |
|
≤±1% |
|
| Yield rate ≥ 99%, |
|
|
Remove bad incoming materials |
| Working noise |
dB |
≤70 |
|
| System stability: |
|
The operating system is sensitive and reliable, the actuator moves accurately, and there is no jam |
| Equipment appearance: |
|
There should be no rust or bumping marks on the exposed machined surface. The electroplated parts are bright without spots, scratches and other phenomena. The painted surface is smooth and flat; |
| Device body color |
|
Meet requirements according to customer needs. |
5 |
Data Processing System |
Main function |
Collect material information, collect production process parameter records and air tightness test data and complete binding and recording with MEA products to achieve product information traceability |
| Complete the binding of MEA product barcodes and component materials; |
| Complete the collection and recording of MEA product air tightness test data |
| The display displays the operating status of the equipment, production data statistics, and product material and air tightness detection information; |
| System stability: the operating system is sensitive and reliable, the actuator moves accurately, and there is no jam |
| 10 |
Adsorption speed of manipulator |
S |
1-4 |
Set arbitrarily within the range |
| 11 |
There should be no rust or bumping marks on the exposed machined surface. The electroplated parts are bright without spots, scratches, etc., and the painted surface is smooth and flat |
| 12 |
System stability: the operating system is sensitive and reliable, the actuator moves accurately, and there is no jam; |
Applicable Situations:
The Seven in One MEA production line is professionally designed for the processing situation of Membrane Electrode Assembly.The integrated system is totally automated which enchance the effeciency of the processing and save labor force economically.This systematic solution is a modernized production line to enchance the production capacity of the factory for hydrogen fuel cell assembly.
Company Profile
FAQ
What's the price of the product?
The price is based on the size,specification and accessories.You can provide us the detailed information and specific requires then we will make the model selection for you and give you the formal offer.
Do you provide customized solutions?
Yes. All our solutions are tailored according to the preferences of the customers.
What's the delivery time?
Three to six months. Our products are start produce after the order, we need three to six months to research and development, production and debugging that ensure the quality of our product before delivery to the customer.
We will send technician overseas installing and training for our customer.
What quality can I expect from Shuntian machinery?
We regards the product's quality as the most important duty.
What does Shuntian company offer?
Our main business id including New energy Fuel Cell/ Hydrogen production by PEM water electrolysis/ All-vanadium flow battery/ Graphite bipolar plates/ Metal bipolar plates/ production Line.
Our best sell products are Hot Servo Forming Press, Vacuum Hot Servo Forming Press/ Servo-Electric Press/ Hot Forming Machine/ superplastic forming (SPF) presses/ Hydraulic Press, ect.
Audited Supplier 
){kind=link}